The Revo III is a four or ten channel, DMX intelligent LED fixture. The fixture can operate in three different operating modes; stand alone, sound-active, or in a Master/Slave configuration. The Revo III comes with several built in programs. When used as a stand alone unit or when used in multiples linked in a master/slave configuration. For best results use fog or special effects smoke to enhance the beams projections.
Extremely Long Life (100,000 hr. rated)
Very low power consumption - connect more units in a single circuit
Runs extremely cool! - NO Duty Cycles! Run all night!
Razor sharp beams
Colors dont fade in time
Specifications:
LED DMX-512 Moonflower with sharp Red, Green, Blue & White Beams
7 LED Clusters - 392 total LEDs: 140 Red, 105 Green, 84 blue and 63 White
10 DMX Channels (4 Channel mode or 10 Channel mode)
4-Button LCD DMX Display
Linkable via XLR connections
Output similar to a 400W Halogen lamp (based on visual side-by-side
comparison with halogen fixtures)
Wide beam spread covers a large area
3 operation modes: DMX, Sound Active & Master/Slave
Sound active from built-in programs
Strobe function
0 100% Dimming
Very low power consumption (Power Draw: 50W)
Extreme long lifetime of the LEDs (100,000 hr. rating)
Includes hanging bracket
1/4 input for optional remote control (sold separately)
Power Link Output link power from another Revo II or Revo III
Dimensions: 12.25 x 12 x 13.25 / 312 x 306 x 334 mm
Weight: 10 lbs. / 4.4 kgs.
WARNING! CONCERNING
DIRECT SUNLIGHT CONTACT
Due to the magnifying type lens, please keep the lens out of contact with
direct sunlight. Direct sunlight can cause heat to build up inside of the
unit, which will seriously damage unit.